AMIE ThunderTM High Voltage DC to DC Converters - Up to 5000VDC
AMI Electronics Thunder line of miniature, high voltage, low-power, DC to DC converters offer isolated, regulated high-voltage output encapsulated in high thermal conductivity epoxy resin for use in harsh environmental environments. These single output devices are available in a variety of input and output voltages. See below for features, specifications, and models, or download the Thunder DC to DC converter family data sheet here. 
The output voltage of the Thunder family of DC to DC converters is directly proportional to the input voltage. The power supply will start with input voltage as low as 2 volts, and will not be damaged by inputs as high as 15% above the rated voltage. All Thunder DC to DC converters are designed to withstand extremes of shock, vibration, acceleration, and thermal shock to work reliably in a
broad spectrum of harsh applications.
Thunder DC to DC converters are available with an input voltage of 0-5VDC, 0-12VDC, or 0-24VDC. The maximum output current ability is achieved at full output voltage and is available as the input voltage decreases. The input capacitance is 10 uF AC bypass. Vout max is defined as the maximum output voltage of the power supply with the standard 5 or 12-V input respectively. For immediate pricing and ordering information, download our RFQ form here.
Features
§ Isolated outputs from ±500 to ±5000VDC
§ Miniature Size – Low Profile
§ High Efficiency
§ High Reliability/Long life
§ Short Circuit/Over Current Protection
§ Low output ripple
§ Regulated - No minimum load Required
§ Wide environmental range
§ Custom Designs Available
– consult with factory |
Electrical Specifications
§ Output Regulation....…Proportional
§ Short Circuit Protection….….…Yes
§ Output Voltage Tolerance………5%
§ Output Power ……….………. 1.5W
General Specifications
§ Dimensions (typ)...35 x 25x 8mm
§ Weight…………………………25g
§ Environmental*……..-20° to +70°C
* Expanded Op Temps available
|
|
|
Input Specifications |
Output Specifications |
|
Model Number |
Voltage |
No Load Current |
Full Load Current |
Voltage |
Maximum Current |
Ripple* (typical) |
|
T-0505 |
0-5 VDC |
50 mA |
400mA |
500 VDC |
2 mA |
±2% |
|
T-1005 |
0-5 VDC |
50 mA |
400mA |
1000 VDC |
1.0 mA |
±2% |
|
T-1505 |
0-5 VDC |
50 mA |
400mA |
1500 VDC |
670 μA |
±2% |
|
T-2005 |
0-5 VDC |
50 mA |
400mA |
2000 VDC |
500 μA |
±2% |
|
T-2505 |
0-5 VDC |
50 mA |
400mA |
2500 VDC |
400 μA |
±2% |
|
T-3005 |
0-5 VDC |
50 mA |
400mA |
3000 VDC |
333 μA |
±2% |
|
T-3505 |
0-5 VDC |
50 mA |
400mA |
3500 VDC |
286 μA |
±2% |
|
T-4005 |
0-5 VDC |
50 mA |
400mA |
4000 VDC |
250 μA |
±2% |
|
T-4505 |
0-5 VDC |
50 mA |
400mA |
4500 VDC |
222 μA |
±2% |
|
T-5005 |
0-5 VDC |
50 mA |
400mA |
5000 VDC |
200 μA |
±2% |
|
T-0512 |
0-12 VDC |
25 mA |
280 mA |
500 VDC |
4 mA |
±2% |
|
T-1012 |
0-12 VDC |
25 mA |
280 mA |
1000 VDC |
2 mA |
±2% |
|
T-1512 |
0-12 VDC |
25 mA |
280 mA |
1500 VDC |
1.3 mA |
±2% |
|
T-2012 |
0-12 VDC |
25 mA |
280 mA |
2000 VDC |
1.0 mA |
±2% |
|
T-2512 |
0-12 VDC |
25 mA |
280 mA |
2500 VDC |
800 μA |
±2% |
|
T-3012 |
0-12 VDC |
25 mA |
280 mA |
3000 VDC |
667 μA |
±2% |
|
T-3512 |
0-12 VDC |
25 mA |
280 mA |
3500 VDC |
570 μA |
±2% |
|
T-4012 |
0-12 VDC |
25 mA |
280 mA |
4000 VDC |
500 μA |
±2% |
|
T-4512 |
0-12 VDC |
25 mA |
280 mA |
4500 VDC |
444 μA |
±2% |
|
T-5012 |
0-12 VDC |
25 mA |
280 mA |
5000 VDC |
400 μA |
±2% |
|
T-0524 |
0-24 VDC |
15 mA |
139 mA |
500 VDC |
4 mA |
±2% |
|
T-1024 |
0-24 VDC |
15 mA |
139 mA |
1000 VDC |
2 mA |
±2% |
|
T-1524 |
0-24 VDC |
15 mA |
139 mA |
1500 VDC |
1.3 mA |
±2% |
|
T-2024 |
0-24 VDC |
15 mA |
139 mA |
2000 VDC |
1.0 mA |
±2% |
|
T-2524 |
0-24 VDC |
15 mA |
139 mA |
2500 VDC |
800 μA |
±2% |
|
T-3024 |
0-24 VDC |
| | 